Dupont ™ Vespel® SP-211-Blatt
Holen Sie sich aktuelle PreisZahlungsart: | T/T,Paypal |
Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
Minimum der Bestellmenge: | 1 Kilogram |
Transport: | Ocean,Land,Air,Express |
Hafen: | Shenzhen,Guangzhou,Hongkong |
Zahlungsart: | T/T,Paypal |
Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
Minimum der Bestellmenge: | 1 Kilogram |
Transport: | Ocean,Land,Air,Express |
Hafen: | Shenzhen,Guangzhou,Hongkong |
Modell: DuPont™ Vespel® SP-211
Marke: Vespel
Verkaufseinheiten | : | Kilogram |
Pakettyp | : | Exportpaket |
DuPont ™ Vespel® SP-211 hat einen niedrigeren Reibungskoeffizienten als SP-21 ohne Schmierung in verschiedenen Anwendungen. Vespel® SP-211 bietet einen hervorragenden Verschleißfestigkeit von bis zu 149 ° C. Erhältlich als benutzerdefinierte Teile oder Lagerformen.
DuPont ™ Vespel® SP-211 ist als isostatisch geformtes Billet und unidirektional gedrückte Platte erhältlich, die als Typ II, Klasse 3M und Typ II, Klasse 3P gemäß ASTM 6456-10 / mil-R-46198 angegeben sind. Vespel® SP-211 wird als Klasse 4 pro AMS 3644G angegeben.
Schlüsseleigenschaften
Hohe Festigkeit bei hohen Temperaturen
Geringe Reibung
Niedriger Verschleiß
Einschränkungen
Chemische Resistenz gegen einige starke Säuren und Basen
Hydrolyzen in Gegenwart von Dampf
Anwendungen
Buchsen und Lager
Dynamische Dichtungen
Schubsperrscheiben
Typische Eigenschaften von Vespel ® Polyimid SP-211 Graphit und PTFE gefüllt
Description | Value | ||
Material Type | Imidized Amorphous Thermoplastic | ||
Chemical Name | PI Polyimide | ||
Trade Name | DuPont™ Vespel® Polyimide SP-211 | ||
Additives | 15% Graphite & 10% PTFE | ||
Color | Black | ||
Manufacturer | DuPont | ||
PHYSICAL | |||
Property | Test | Unit of Measure | Value |
Density | ASTM D792 | g/cm³ | 1.55 |
ASTM D792 | lb/in³ | 0.056 | |
Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | 0.21 |
MECHANICAL | |||
Property | Test | Unit of Measure | Value |
Tensile Strength | ASTM D638 | psi | 6500 |
Tensile Elongation at Break | ASTM D638 | % | 3.5 |
Flexural Strength | ASTM D790 | psi | 10000 |
Flexural Modulus | ASTM D790 | psi | 450000 |
Compressive Strength | ASTM D695 | psi | 14800 |
Compressive Modulus | ASTM D695 | psi | 300000 |
Hardness | ASTM D785 | NA | Rockwell E1 - 20 |
Static Coefficient of Friction | Static COF in Air* | NA | 0.2 |
Dynamic Coefficient of Friction | COF@PV = 3.5 MPa m/s (100K psi-ft/min)* | NA | 0.08 |
THERMAL | |||
Property | Test | Unit of Measure | Value |
Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./°F | 3 |
Max Continuous Operating Temp | °C | 260 | |
°F | 500 | ||
Minimum Operating Temp | °C | -195 | |
°F | -319 | ||
Thermal Conductivity | ASTM C117 | BTU-in/ft²-hr-°F | 5.3 |
ASTM C117 | x 10^4 cal/cm-sec-°C | 18.3 | |
Flammability Rating | UL94 | NA | V-0 |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.