Sustapei ultem ™ 1000 pei
Holen Sie sich aktuelle PreisZahlungsart: | T/T,Paypal |
Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
Minimum der Bestellmenge: | 1 Kilogram |
Transport: | Ocean,Land,Air,Express |
Hafen: | Shenzhen,Guangzhou,Hongkong |
Zahlungsart: | T/T,Paypal |
Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
Minimum der Bestellmenge: | 1 Kilogram |
Transport: | Ocean,Land,Air,Express |
Hafen: | Shenzhen,Guangzhou,Hongkong |
Modell: SustaPEI Ultem™ 1000 PEI
Marke: Sustapei
Verkaufseinheiten | : | Kilogram |
Pakettyp | : | Exportpaket |
Sustapei (Ultem ™ 1000) ist ein amorphes Polyetherimid, das eine hervorragende thermische Leistung und eine hohe mechanische Festigkeit und Steifheit für eine Vielzahl von Strukturanwendungen bietet. Es ist von Natur aus flammhemmend, besitzt eine gute Resistenz gegen Säuren und kann kontinuierlich in Dampf und heißem Wasser arbeiten. Sustapei (Ultemtm 1000) wird in natürlicher (bernsteinpackung) und schwarz angeboten.
Schlüsseleigenschaften
Kontinuierliche Verwendungstemperatur von 340/ f
Hydrolyseresistent
Hohe dielektrische Festigkeit
Sehr resistent gegen saure Lösungen
Niedrige thermische Expansion
In der Lage, mehrere Autoklavenzyklen standzuhalten
Von Natur aus flammhemmend
Hohe Festigkeit und Starrheit bei erhöhten Temperaturen
Einschränkungen
Chemische Resistenz gegen organische Lösungsmittel und aromatische Kohlenwasserstoffe (umfasst viele Öle, Kraftstoffe und Fettsäuren)
Anwendungen
Flüssigkeitshandhabungsverteiler und Anschlüsse
Elektronische / elektrische Isolatoren
Analytische Instrumentierung
Medizinische Geräte
Flugzeugkomponenten
Halbleiterkomponenten
Verfügbare Farben
Bernsteintransparent
Schwarz
Typische Eigenschaften von Sustapei Ultem ® 1000
Description | Value | ||
Material Type | Amorphous Thermoplastic | ||
Chemical Name | PEI Polyetherimide | ||
Trade Name | SustaPEI | ||
Additives | Unfilled | ||
Color | Amber Transparent | ||
Manufacturer | Rochling | ||
PHYSICAL | |||
Property | Test | Unit of Measure | Value |
Density | ASTM D792 | g/cm³ | 1.27 |
ASTM D792 | lb/in³ | 0.046 | |
Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | 0.25 |
Water Absorption, Saturation, Immersion | ASTM D570 | % by wt. | 1.25 |
MECHANICAL | |||
Property | Test | Unit of Measure | Value |
Tensile Strength | ASTM D638 | psi | 16,700 |
Tensile Modulus | ASTM D638 | psi | 480,000 |
Tensile Elongation at Break | ASTM D638 | % | 80 |
Flexural Strength | ASTM D790 | psi | 20,000 |
Flexural Modulus | ASTM D790 | psi | 500,000 |
Compressive Strength | ASTM D695 | psi | 22,000 |
Hardness | ASTM D785 | NA | Rockwell M114 |
IZOD Impact-Notched | ASTM D256 | ft-lb/in | 0.6 |
Dynamic Coefficient of Friction | NA | 0.2 | |
THERMAL | |||
Property | Test | Unit of Measure | Value |
Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./°F | 3.1 |
Heat Deflection Temp | ASTM D648 | °C at 264 psi | 202 |
ASTM D648 | °F at 264 psi | 395 | |
Melting Point Temp | ASTM D3418 | °C | 238 |
ASTM D3418 | °F | 460 | |
Max Continuous Operating Temp | °C | 171 | |
°F | 340 | ||
Minimum Operating Temp | °C | -50 | |
°F | -58 | ||
Thermal Conductivity | ASTM C117 | BTU-in/ft²-hr-°F | 1 |
Flammability Rating | UL94 | NA | V-0 |
ELECTRICAL | |||
Property | Test | Unit of Measure | Value |
Dielectric Strength | ASTM D149 | V/mil | 830 |
Dielectric Constant at 1 MHz | ASTM D150 | NA | 3.2 |
Dissipation Factor at 1 MHz | ASTM D150 | NA | 0.001 |
Surface Resistivity | ASTM D257 | ohm/square | 10^16 |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.